The NZ Hydravalve consists of a fixed jumper valve onto a non-rising spindle. The fixed jumper valve is a dezincification resistant brass unit with a rubber compound vulcanised to it. This rubber is designed to come into contact with the valve seat giving the NZ Hydravalve a resilient sealing system. The NZ Hydravalve is also available with a built in checkvalve on the inlet side of the Hydravalve giving the added benefit of backflow prevention.

BENEFITS:

• Flow rate 43 l/s @ 300kPa
• Corrosion resistant coating system
• Compliance with AS3855
• Backflow prevention
• Lightweight Ductile Iron body
• Triple 'o' ring stem sealing system

PERFORMANCE DATA:

•    Max Recommended Operating Pressure: •    Max Recommended Operating Temperature: •    Flowrate @ 300 kPa:

1600 Kpa 80° Celsius 43 l/s

COATING INFORMATION:
The NZ Hydravalve is coated and lined with a thermal bonded polymeric coating system in accordance with AS/NZS4158. This standard specifies the minimum film thickness and performance characteristics to ensure continuity in the coating and subsequent product. The following table identifies the critical coating thickness requirements of AS/NZS4158 for both types of standard thermal coating systems used in the water industry.

Coating Type	Internal Surfaces	External Surfaces
Thermoplastic (RN11)	250um	200um
Thermoset (FBE)	350um	300um
Note. um = microns (film thickness)

DIMENSIONS:
	•    Nominal Bore •    Overall Height •    Length •    Width •    Mass	80mm 395mm 326mm 200mm 24.3Kg
STANDARD MATERIAL:
	•    Body •    Bonnet •    Inner Spindle •    Outer Spindle •    Gland Nut •    Jumper •    Jumper Seal •    Outlet/Coupling •    Fasteners •    Body Gasket •    Coating	Ductile Iron to AS1830 Ductile Iron to AS1830 Stainless Steel, Gr 431 Valve Brass Valve Brass Valve Brass Vulcanised Nitrile Rubber Manganese Bronze Stainless Steel Cap Screws Natural Rubber Rilsan Nylon 11 / FBE
OPTIONS:
	•    Body •    Bonnet •    Spindle •    Jumper Seal •    Fasteners •    Gasket	Cast Grey Iron to AS 1830 Cast Grey Iron/Manganese Bronze Stainless Steel/Stainless Steel Alternative materials available on request Galvanised / Powder coated Natural Rubber to AS1646

Products are available for application outside the standard performance criteria listed above. Please contact your Crevet Technical Representatives at your nearest Sales and Distribution Centre for more information.

DISCLAIMER