BENEFITS:

• Flow rate 24 l/s at 500 kPa
• Positive, reverse flow shut-off.
• Standard Hydrant components
• Dual function
• Compact design
• Performance tested flow characteristics
• Corrosion resistant coating

PERFORMANCE DATA:

•    Max Recommended Operating Pressure: •    Max Recommended Operating Temperature: •    Flowrate @ 500 kPa:

1600 Kpa 80° Celsius 24 l/s

COATING INFORMATION:
Hydratech 2000 hydrant is coated with a thermal bonded polymeric coating system in accordance with AS4158. This standard specifies a minimum film thickness and performance characteristics to ensure continuity in the coating and subsequent product. The following table identifies the critical coating thickness requirements of AS4158 for both types of standard thermal coating system in use in the Australian water industry.

Coating Type	Internal Surfaces	External Surfaces
Thermoplastic (RN11)	250um	200um
Thermoset (FBE)	350um	300um
Note. um = microns (film thickness)

DIMENSIONS:
	•    Nominal Bore •    Overall Height •    Length •    Width •    Mass	80mm 482mm 355mm 190mm 30Kg
STANDARD MATERIAL:
	•    Body •    Yoke •    Spring •    Mushroom •    Jumper Valve •    Washer •    Fasteners •    Gasket •    Coating	Cast Grey Iron GrT2220 to AS1830 Cast Grey Iron GrT2220 to AS1830 Stainless Steel Gr 302 DR Brass Gr486 to AS1567/8 Gunmetal GrC83600 to AS1565 polyurethane PU40 Stainless Steel Gr316/304 Natural Rubber Rilsan Nylon 11
OPTIONS:
	•    Body •    Yoke •    Spindle •    Mushroom •    Fasteners	Cast Grey Iron GRT220 to AS 1830 Cast Grey Iron GRT220 to AS 1830 Stainless Steel/Stainless Steel Gunmetal Grc83600 to AS 1565 Galvanised / Powder coated

Products are available for application outside the standard performance criteria listed above. Please contact your Crevet Technical Representatives at your nearest Sales and Distribution Centre for more information.

DISCLAIMER