Pipes Fast Find Index: AS/NZS 1477 Series 2 - Plas-Iron Pipe AS/NZS 1477 Series 1 - Aqua-Seal Pipe AS/NZS 1477 Series 1 - Pressure Pipe DWV (Drain Waste and Vent) Pipe Stormwater Pipe Conduit Flanged Ductile Iron Pipe Macwrap Protective Sleeving

Ductile Iron Pipe

DESCRIPTION: Crevet distributes a full range of Ductile Iron pipes to the water supply and sewerage industry. Ductile Iron pipe is available in sizes ranging from 100mm to 750mm nominal. Ductile Iron pipe is available with a rubber ring jointing system or fixed screwed flange joints. Ductile Iron pipe is manufactured to dimensional and performance requirements of AS/NZS2280. Ductile Iron is generally cement mortar lined and coated in a bituminous paint system. Ductile Iron pipe is available in two classes, K9 for standard applications and K12 for flanging.

Crevet is able to offer ductile iron pipe with increased effective sealing lengths than has traditionally been available in the Australian water industry in the larger diameters. Ductile Iron pipe is most commonly used in major trunk main applications from 300mm on upwards. Crevet is able to offer ductile iron pipe, fittings and valves as a complete solution to any pipeline application. BENEFITS: Compliance with AS/NZS2280 dimensions and performance High impact/mechanical strength Suitable for above and below ground applications Suitable for high pressure applications Available in both Socket x Spigot and Flanged End configurations. Corrosion Resistant Compatible with existing fittings MATERIALS: Ductile Iron to AS1831 Seal Ring, Natural Rubber to AS1646 COMPATIBILITY: Griptite Fittings Flanged Fittings Resilient Sealing Sluice Valves Gibault Joints Plas Iron uPVC DI O.D. D.I. Socket Fittings Spigot Fittings Taptite Tapping Bands Aussie Clamps OPTIONS: Coating and Lining Materials Socket x Spigot ended 6.1 metre length for 300mm and above Alternative seal compounds for specific applications Flanged; Standard drilling to AS4087 drilling B5, B6. Other drilling available upon request. LENGTHS: Minimum effective pipe length of socket x spigot pipe, as per AS/NZS2280 requirements, 5.5 metres. Pipe with effective length of up to 6.0 metres available in diameters from 300, on up. Flanged ductile iron pipe limited to a maximum of 5.33 metres. ACCREDITATION: AS/ISO9002 Quality Systems

DISCLAIMER Ductile Iron Pipe cont'd >>