  |
COMPRESSION FERRULE BEND
Size
15mm
25mm
40mm |
20mm
32mm
50mm |
This bend has a union nut one end to suit all ferrules supplied bare. The other end has a flared copper compression
nut, for connecting TPFNR, TPF, SIV and standard ferrules to copper pipe. |
|
SIV FERRULE
Size
16x16mm
25X25mm
32X32mm
40X40mm
50x50mm
63x63mm |
Code
PP1L
PP2L
PP3L
PP4L
PP5L
PP6L |
This tap has a packed gland and has an integral Pe fitting both ends for direct connection to polyethylene both
ends. This tap also has a lug drilled with two holes for fastening. The PE ends being a special thread does not
allow it to be connected to other standard pipe thread fittings.
The tap is supplied with leather jumper valve as standard although it can be supplied with an all brass jumper
valve if specified. |
 |
MALE BSP FERRULE BEND
Size
15mm
25mm
40mm |
20mm
32mm
50mm |
This bend has a union nut end to suit all ferrules supplied bare. The other end has a male BSP thread, for connecting
TPFNR, TPF, SIV and standard ferrules to any BSP threaded end. |
|
STOP TAP POLY X F.I.
Size
16x16mm
25X25mm
32X32mm
40X40mm
50x50mm
63x63mm |
Code
PP1L
PP2L
PP3L
PP4L
PP5L
PP6L |
The tap has a packed gland, a female iron end one end, an integral PE fitting the other end. The poly end being
the inlet and the female iron end is the outlet.
The tap is supplied with leather jumper valve although a brass jumper valve could be supplied if specified. The
tap is supplied complete with nut, wedging ring and thimble for direct polyethylene connectors. |